VHM Carbon air intake KTM 450EXC-F / Husqvarna FE450 2019 - 2023

Developed for an optimum air flow and made of real carbon. When the engine is running and temperatures rise, the airbox rubber usually deforms. This is due to the high temperatures as it get's more soft, which leads to an even less optimal air flow. Our carbon intake prevents the airbox from deforming and improves greatly on bottom power.

To use this air intake, you need a powerflow kit from Twin Air (part number 154222C).

Mounting the intake
1. Take the air filter cover off
2. First you need to disassemble the temperature sensor
3. Make sure the temperature sensor points down. Hold the intake in one hand, with the aluminium label facing towards you. Make small twist movements while pushing.
4. Ensure the intake is fitted all the way through the end, you need to give it a firm push. The hole for the temp. sensor should match the hole in the rubber.
5. Assemble the temperature sensor, it goes through the airbox rubber and intake.
6. Mount the air filter support from Twin Air powerflow kit 154222C and air filter cover for driving. The standard air filter support is too low, the air filter support from Twin Air is higher so the intake fits.
7. Need to clean your bike? You can mount an airbox cover so it's water resistant.

Real carbon
Massive bottom power improvement
Optimum air flow
Easy to mount
Prevents airbox rubber from deforming at high temperatures
Including hole for temperature sensor
Ensures that dirt/mud is evenly spread over whole airbox
Must be used in combination with Twin Air powerflow kit 154222CSpecifications
Part number
AI060919E
Stroke
4T
Carbon type
air intake
Applications
Application
Make
Model
Year
Motocross
KTM
450EXC-F
2019-2023
Motocross
Husqvarna
FE450
2019-2023
Motocross
Husqvarna
FE501
2019-2023